Diameters
From 3 to 12.23m
Capacity Volumes
From 35 m³
up to 1,480 m³
Guaranteed steel
S450 GD with Z600g/m² coating
Structural calculation
ANSI - ASAE EP 433 2033, Eurocode EUROCODE EN - 1991-4 or any required standard.
Silo components
Cylinder//
Precision Manufacturing and Efficient Design
BODYSHEETS
| Material | |
|---|---|
|
Steel |
S450GD EN 10346:2015 |
|
Galvanisation |
S450GD EN 10346:2015 |
|
Breaking load |
510 N/mm2 |
|
Yield strength |
450 N/mm2 |
|
Thickness |
e= 0,8 a 4 mm |
Design and technical features
Corrugation: 76×14 mm
Usable height: 1440 mm
Usable length: 2400 mm
STIFFENER
| Material | |
|---|---|
|
Steel |
S450GD EN 10346:2015 |
|
Galvanisation |
S450GD EN 10346:2015 |
|
Breaking load |
510 N/mm2 |
|
Yield strength |
450 N/mm2 |
|
Thickness |
e= 1.5 to 4 mm |
Design and technical features
Omega profiles: Special design to support the vertical load.
Perforations: Every 76mm.
OTHER STANDARD COMPONENTS//
MATERIAL:
Steel: S275JR
Galvanised: HDG
DESIGN AND FEATURES:
Cylinder. Access to the inside of the silo.
Size: 600×700 mm and 530×700 mm.
Closing: 4 pressure screws (2 external and 2 internal) and foam.
Pre-drilled ferrule: Avoids work on site.
MATERIAL:
Hot dip galvanised (M 10: 70 – 85 and M8 50 – 80 micron zinc)
Extra strength and extra corrosion protection.
DESIGN AND FEATURES:
Plate washer with neoprene gasket
Delivery: Pre-assembled
Quality: 8.8 and 10.9
Pre-assembled washer to avoid on-site work.
Supplied with double cord to ensure optimum sealing.